Shanghai Puyi Industrial Co., Ltd.
Quality first, service first, continuous improvement and innovation to meet the customers.
Add to Cart
Dumper Rubber Tracks 750X150X66 for Morooka MST2200 and IHI IC100
1. Application
Rubber track size need to be carefully checked before purchasing.
If you donot know the rubber tracks size,please send us the machine brand and model,we will
help check the size for you.
And rubber track can be customized,if any special need towards the rubber track,please feel free to contact us.
We ensure 750X150X66 can be fit perfectly on below rubber tracks,if any need,please contact us.
| Model (Brand) | Origin Size | Replace Size | Roller Type |
| AT2200 (ALLTRACK) | 750X150X66 | 750X150X66 | A2 |
| CG110 (FIAT HITACHI) | 800X150X66 | 750X150X66 | A2 |
| IC100 (IHI) | 750X150X66 | 750X150X66 | A2 |
| MST2200 (MOROOKA) | 750X150X66 | 750X150X66 | A2 |
| MST2300 (MOROOKA) | 750X150X66 | 750X150X66 | A2 |
2. Future of rubber track:
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ cmm, a major reason for its use on the wet and soft terrain.
Rubber tracks insulate machine and operator from vibration, extending the machine's lifetime and lowering operate fatigue.
The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the sane weight.
3. Notice on using
Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately. When storing for long periods, keep indoors, away from direct sunshine and rain.
Replace as soon as possible when abrasion of sprockets is observed.
The rubber track should be frequently maintained and cleaned after excessive use of sediment and chemicals. Otherwise it will accelerate the rubber track wear and corrosion.
In summary, as long as the user care about the rubber tracks, the crawler life will be extended accordingly.Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases. (Be careful because the rubber crawler may come off if the tension is too low).
Avoid projection from the frame around the rubber crawler, especially on its inner circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame, an accident such the rubber being cut can occur). Avoid sharp projections when traveling.
4. Warranty
The track warranty which runs from date of purchase period varies according to track type. We
guarantee one year under normal use.
Rubber Tracks are not warranted against wear and tear, misuse, damage caused by
non-recommended working conditions including but not limited to use on demolition sites or
other site where track damage is likely due to rubble, concrete, metal etc, use in water, worn
undercarriage components or improper track adjustment.
5. Packaging & Delivery
Delivery time: 15days-20 days for 2 PCS
Packing: Bare package or Pallet
